If the Hideez Client App shows you this message "Connection failed. Trying to re-bond device..." while touching the dongle with a Hideez Key, then try the following:
Stop the Service. Go to Task Manager > Services
Right-click on the line Hideez Service and Stop.
Please, close Device Maintenance Application if it is open now.
Go to C:/Program Data/Hideez/Sevice/Bonds and delete the file corresponding to the mac address of your key. For example, if your key has a mac address of E8:53:AA:23:BB, the file will be named BB-8A-23-AA-53-E8.hbf.
Run the Service. Go to Task Manager > Services. Right-click on the line Hideez Service and Start.
Try to connect Hideez Key to the Hideez Client again.
Program Data is the hidden folder. Follow this if you don't see it.
Update firmware if needed. Follow this .
If the Hideez Key device has not yet been used with this workstation, then the first time you need to pair Hideez Key with Dongle. During pairing, Hideez Key periodically blinks (lights up) with a green LED. To confirm, you need to perform a short press on the button. . If you don’t click on the button within 15 seconds, the pairing will not take place and the Hideez Client App will not be able to work with Hideez Key. To re-pair, you must re-execute a long tap.
Hideez Client App – Connection failure
